- Deal of the Week
- About Us
- Contact Us
- Name Your Price
Midmark Ritter M11 UltraClave® Automatic Sterilizer
Pulse-air Removal Technology.
The M11's Steam-Flush Pressure-Pulse Air Removal System is so efficient that it can pass the air removal tests required on more complex vacuum steam autoclave systems, thus ensuring good steam penetration for those challenging loads. Plus, less complexity means better reliability and a cost effective solution for your sterilization needs.
Convenience at a Glance.
The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode, the temperature, pressure, and the remaining cycle time is displayed. Remaining cycle time is also displayed in the dry mode. Note: Temperature & pressure are not displayed during dry mode.
No More Wet Instruments.
Once the sterilization is complete, the door of the autoclave opens automatically and quietly to dissipate steam and dry your instruments. You'll have dry, sterile instruments every time.
If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization will not continue until you've attended to the unit.
Ease of Draining & Filling.
For ease of draining and filling, the M11's reservoir fill port and drain tube are in the front of the unit, not on top or in back.
Optional Printer Accessory.
The M11 printer accessory provides a permanent record of cycle times, temperatures and pressures during a cycle.
Self Program Controls.
Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Exposure Time (3 to 90 minutes), Temperature (230 to 275° F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired.
Four pre-programmed sterilization cycle controls: Unwrapped (132° C or 270° F for 3 minutes), Pouches (132° C or 270° F for 5 minutes), Packs (121° C or 250° F for 30 minutes), Handpieces (unwrapped and pouched) (132°C or 270° F for 6 minutes).
Indicates cycle selected, temperature and exposure time. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
The Midmark Ritter M11 couldn't be easier and is time tested for reliability. You load it, set it, and forget it. Select your cycle and the time is set for you. Press "Start" and the Ritter M11 fills with the correct amount of water. Once the sterilization process is complete, the door opens automatically and quietly to dissipate the steam to give you fast drying time for your instruments. It's real convenience!
At Cardiac Direct, we do our best to provide our customers with quality products at the lowest possible price. If you see an item marked with a Price Match Guarantee seal for less on a competitor website, we will meet or beat it! The site be an authorized distributor and the price quoted must be the standard advertised price.
How to Submit a Lower Price
To submit a lower price send us the item number in question, a link to the competitor price page, along with your full name and contact information to firstname.lastname@example.org. As soon as we receive your email, a member of our sales staff will review the information and contact you with a Meet or Beat offer.
For more information, please call us at 1-888-354-2968 .
Enter your email address and we will send you an instant discount and a link to add this item to your cart.
Call Us Now